The causes of structural cracks in the walls of the house can occur for many reasons. As an initial stage, to anticipate this crack, you need to monitor and pay attention to the shape of the crack. By doing this initial step, will be able to help you to determine the cause of the crack and at the same time find the right solution. If the cause of the walls of the house structure cracks is due to a decreased foundation or a sinkage, a solution can be taken by using underpinning services in Melbourne. The first thing to do is to compaction the soil under the location to be built.

A structural crack is dangerous enough for the stability of a building to be able to stand firmly. A general characteristic that can be seen immediately on the wall, is a crack that is more than 2 mm wide and has penetrated the other sidewall. To repair the construction of a cracked house wall this structure is not an easy matter. Not only is it costly because it requires repair or reconstruction of the building structure, but it also has to be ensured that the building must remain in a stable state if there are movement and re-shift. The cause of tensile cracks is due to a decrease in the soil surface. This is common in every building anywhere. It will not endanger the condition of the building as long as this subsidence occurs simultaneously. But on the contrary, this condition will be quite dangerous if this decline occurs simultaneously.

At certain points, it will result in different elevation changes in the building. This can be seen from the shape of the cracks that appear wider at the top and smaller at the bottom. Some of the causes can be due to various things such as the uneven compaction of the building body, erosion at the base of the building foundation caused by the flow of water flowing in the area, uneven concentrated loads on the building, minor earthquakes, and many other things.