When buying a string, we must know the length of the bow. This can be done by measuring from the depression at one end of the arc (limb) to the depression at the other end. In modern recurve bows (standard bow and FITA), the length of the bow is usually marked on the limb body in inches. Once you know the length of the bow, then you can determine the length of the string for your bow. In recurve bows, the length of the string is usually 4 inches shorter than the length of the bow. While the longbow, the length is 3 inches shorter than the length of the bow. In the meantime, if you also prefer to switch to compound bows from time to time, then perhaps you also need to check out top bow strings for compound bows.

If you’re not sure about your measurements, just come to the nearest archery shop to learn the length of the string. In trusted stores, you can freely ask questions and ask for the best advice for your archery equipment needs.

Then, determine how many strands (ply) of string material you need. This can be determined according to the draw weight and the material of the bowstring.

Large draw weights will require more strands to carry the weight. And a smaller draw weight will require fewer strands. Consult this at your regular archery shop or trainer.

For recurve bows and longbows, there are two types based on how they are made: FLEMISH TWIST and ENDLESS LOOP. The flemish twist on the holes at both ends in the form of a braid. Whereas in Endless loop, the holes at both ends are lined with serving yarn loops.

Flemish twist strings are often used on trad bows. Adds a sense of aesthetics and beauty to traditional bows. While the Endless loop string we often encounter is used on the target archer’s bow. And this last string type, in addition to providing ready-to-use strings, some of the best stores can make customs according to customer needs.