Wanting to look different from other cars is sometimes taken by changing the colour of the car. One of them is by installing a variety of stickers on several parts of the car body like Bumper Stickers. Stickers can also be used to decorate and sweeten the appearance of the car. Body stickers are usually installed so that the car looks more stylish and beautiful according to the tastes of the vehicle owner. However, if you don’t know the proper installation technique, then you can be sure that the stickers that are installed look imperfect and tend to fall apart. Here’s how to install the correct car body cutting sticker.1. Clean Car. Prepare sticker tools to be pasted, such as hairdryer, needle or pin, soap, bucket, cloth, ruler. It would be nice to wash the car first until it is clean so that no dirt will interfere with the installation process.

2. If the car is clean, dry immediately. If the car is clean, then wipe the car dry. You can use a chamois to dry the car to make it easier to install stickers.

3. Polish the car to make it soft. If it is dry, we repeat the cleaning with cleaning alcohol, gasoline, or wax, of course, with a sponge added so that it is evenly distributed throughout the body of your car. After finishing polishing, you try to feel the car body to feel whether it is smooth or not. If it is smooth then start sticking the sticker.

4. Decide which sticker to install. Determine the starting point of installation and stick the sticker on the surface of the car body. Paste the sticker earlier on the car body, then make sure the position is right. Be careful when removing the patch otherwise, the result will be bad

5. Make sure your stickers stick tightly. The next step is to massage the sticker with a kind of thin rubber with a flat end so that the water between the body and the sticker is wasted, then heat it using a hairdryer until it is completely dry.