The periods where it rains very often, are the times when we have to be good at checking the condition of electronic devices so that no part is shortened due to being hit by raindrops. Same with other electronic devices, the engine on the AC can also be damaged due to entry by rain. Not only that but the humid temperature when it rains also makes the air conditioner sometimes have to be adjusted to the maximum and often standby. Even though it’s raining outside, sometimes the air in the room still makes us hot so we often turn on the air conditioner. You can visit Electromechanical companies in dubai if you need our service.

So that the air conditioner remains durable and avoids the following damage a number of tips on caring for the air conditioner properly. This step will help how to take care of the AC so that later when the air temperature begins to heat again, damage to the AC unit can be avoided, and you don’t need an HVAC repair.

Clean the air filter
AC filters that have been dirty are the source of all the accumulation of dirt, dust, or bacteria. For this reason, clean this device so that the air quality produced by the air conditioner can be optimized. Cleaning the AC filter in the rainy season is also very important and should be as often as possible. This is useful so that dust and dirt that does not clog air circulation. This filter is also easier to get dirty in the rainy season, so you need to do regular maintenance or AC service.

Clean the AC evaporator
In addition to the AC filter, the evaporator on the air conditioner is also a device that is exposed to dust, dirt, and even frost. The evaporator is a device in AC that functions to absorb and drain heat from the air inside the refrigerant. Later the liquid will be converted into gas after passing through the capillary tube. So this component is tasked to exchange heat, the air in the room will be absorbed by the evaporator and into the fins of the pipe so that cold air will come out. It is very important to clean these components so that there will be no accumulation of frost due to air exchange through fins or evaporator ventilation.